In this article, we will take you to discover the world of dishwashers. A journey to be considered not as a fallback for those who cannot afford a vacation, but as an unmissable opportunity. Those who have not yet made room in the kitchen for this appliance should think again to save not only the effort of washing by hand, but also natural and economic resources. Washing dishes and utensils in this appliance, in fact, is much more convenient than in a traditional sink. You waste less and rest more.
Knowing which are the best dishwasher on the market is important. However, knowing the different types of washing programs and how many degrees the dishwasher washes can also be useful. When you know, you can act rationally by selecting only what is most advantageous. You can save a lot in terms of money and natural resources. You just need to pay a little attention to some details.
Summary
Generally, the dishwasher water temperature can vary from 40°C to 75°C depending on the type of cycle set. The duration of the wash also depends on the latter.
Of course, the programs are very similar even if they belong to appliances of different brands. The name may change, but the features are standard.
Here is a brief overview of all the available options with the indications of the duration and temperature of the dishwasher.
This is the standard one to use if possible, when the dishwasher is full. It lasts approximately 80 minutes, and the water temperature varies from 55°C to 65°C .
For delicate dishes, porcelain, or crystal, washing at a low temperature of maximum 40°C is ideal.
The quick dishwasher wash is useful for lightly soiled and un encrusted dishes. As the name suggests, it has a short duration of 30 minutes maximum, and the temperature stops at 60°C.
Nowadays, almost all household appliances have an eco-friendly program that aims to save energy. In the case of dishwashers, less water and energy are used and a relatively low temperature (maximum 50°C). The duration is slightly longer than that of the normal cycle, but this wash is suitable for all levels of dirt and allows the use of ecological detergents.
Where there are stains that are difficult to remove, it is possible to use this washing programme which requires the dishwasher to reach a very high temperature: it ranges from 60°C up to 70°C.
To have plates, glasses, pots and pans and cutlery that are not only clean but also sanitized, this program is ideal because it includes a final antibacterial rinse. The dishwasher water temperature reaches, in this case, 70°C.
When you have few dishes in the appliance and they are not that dirty, you can choose the economy program that keeps the temperatures low (between 40°C and 50°C) and with a duration similar to that of the daily wash.
We have seen that the dishwasher generally washes at a temperature between 40°C and 65°C. The highest temperature, that is, the one that reaches 70°C, is only used in the high-intensity programs used to remove stubborn dirt or in the rinse phase. In the latter, the high numbers allow the dishes to be sterilized and washed thoroughly.
In the most technologically advanced models, there are programs that can automatically regulate the temperature and duration of the dishwasher wash thanks to sensors that can detect dirt. For example, Whirlpool dishwashers (6th SENSE technology) or Bauknecht (6th SENSE Power Clean) are equipped with this option. Another very useful option is to delay the start and program everything for a later time.
It is important to select the cycle that best suits the situation to avoid not only wasting resources, but also money. In general, it is always better to start the washing cycles when the appliance is fully loaded, thus avoiding operating the appliance too many times. If you want to opt for a short cycle in the dishwasher, it will be better to rinse the dishes manually first in order to limit dirt. This could work especially for the most encrusted dishes.
As for detergent, the best thing to do is to try to use a quantity proportionate to the level of dirt without exaggerating.
High temperatures should always be limited to cases that are truly necessary. This is because in the long run they could ruin plates, glasses and other items by making them opaque. In fact, heat agitates the molecules of the glass and the chemicals in the detergent can alter its shine. High temperatures are also the main reason why it would be better not to put certain materials inside the dishwasher. Plastic cannot withstand excessive heat, just like plates and dishes with metallic or hand-painted decorations. It would also be better to avoid putting wooden, cast iron or tin objects in for washing at high temperatures.
Knowing how many degrees your dishwasher washes at is important not only to help you plan your wash cycle, but also to understand when the appliance is not heating the water.
Finding yourself with dirty dishes is one of the symptoms that should alarm you. It is possible that there is a fault in the resistance (the component that heats the water), in the thermostat (the temperature regulator) or in the electronic board (the heart of the appliance's activities).
To solve the problem, if your dishwasher is out of warranty, you need a specialized Coimbatore Service technician. It is good to repair the appliance, but it is better not to do it yourself wasting who knows how much time and energy. These are easy problems to repair, perhaps just by replacing the broken component. However, an expert eye and hand will be much more effective. So, why not take advantage of the service offered?
Copyright © 2020 Coimbatore Service.