What to do if the washing machine breaks down?

What to do if the washing machine breaks down?

What to do if the washing machine breaks down?

Immediately after buying a washing machine, of course, there should not be any problems with the device. However, over time, the washing machine, like any household appliance, experiences minor and sometimes serious problems. When a washing machine breaks down, it's especially annoying because you lose a trusted assistant. It is worth noting that problems with washing machines cannot always be solved with expensive and cumbersome repairs. Instead, there are certainly cases where you can solve problems with technology without outside help in just a few simple steps.

Consider 7 typical washing machine problems:

1. After turning it on, no water enters the machine.

2. Water is leaking in the washing machine.

3. The washing machine no longer drains.

4. The washing machine no longer spins.

5. The drum stops rotating.

6. The machine does not start even though the lights are on.

7. Linen remains dirty after washing.

Each of these issues requires separate attention. Therefore, we will consider how they can be caused and how to solve these or other problems. In most cases, washing machine repairs are needed, which is best entrusted to an experienced specialist.

Problem number 1: water does not enter the machine after turning it on.

It often happens that you press the start button and nothing happens. Water does not enter the washing machine after switching it on. What are the possible reasons:

1. Washing machine door does not close correctly.

2. The water supply is blocked, for example, due to a clogged filter or a kink in the inlet hose.

3. The faucet is not open or not open enough.


So, in your first steps - you should focus on the door, faucet, and hose. Only when there are no kinks and blockages, and everything is in order with the door, then you should think about professional repairs.

Problem #2: Water is leaking from the washing machine.

If clean water or water that has already been used for rinsing flows out of the machine, you should first find the leak. In some cases, minor repairs to the washing machine may be required, which you can do yourself.

1. Possible causes of water leakage from the door,

2. The door is damaged and therefore leaking.,

3. Foreign objects are stuck between the glass and the rubber, which do not allow the door to be completely closed or water flows out in certain places,

4. The rubber door seal is defective.


A simple removal of small foreign bodies may help. In all other cases, only the replacement of the relevant components will help.

Possible causes of water leakage from the bottom, behind, or next to the washing machine:

1. Too much detergent has been used.

2. Pump filter open

3. Hoses are loose or defective.

First of all, turn off the water supply to avoid further flooding. Then check the amount of detergent, there may also be too much foam in the drum. If this is not the problem, check all hoses. If they are loose, it is enough to tighten them. And if defects are found, a replacement will be required. Also, check that the filter is closed.

Problem #3: The washing machine stops draining water.

Possible reasons:

If the machine rattles and hums, but the water no longer drains, the cause may be something other than a clogged filter. For example, the problem is this:

1. Clogged sewer.

2. Clogged lint filter or pump.

3. Faulty electronics.

4. Faulty pump and broken V-belt.


Washing machine problems like this are usually fixed by cleaning and checking the hoses, fluff filter, and pump filter. It is better to turn to a professional and find quality washing machine repair in Coimbatore to fix larger problems. A technician who specializes in repairing LG, Samsung, Bosch, IFB, and Whirlpool other washing machines will help fix the situation.

Problem number 4: The machine does not wring out.

If the washing machine has stopped spinning, this may be due to several reasons, for example:

1. The drum is jammed because the wet, which means heavy laundry, is poorly distributed over it or the weight is too large.

2. The problem is a faulty pump and because of this, the drum does not rotate during the spin cycle.

3. The washing machine is not placed on a level surface.

4. Faulty shock absorbers or worn motor brushes.


First of all, try spinning again, but with less laundry. And if it's an uneven surface, adjust the legs of the washing machine according to the level. In all other cases, professional help will be needed.

Problem #5: The drum has stopped spinning

Unfortunately, it is difficult to fix this problem on your own, as the motor or drive belt is faulty.

Problem #6: The machine won't start even though the lights are on

If the washing machine does not start, the washing machine may have tripped. This may occur if the water pressure is incorrect or if the voltage fluctuates.


A possible help is to briefly cut off the current, so the plug of the device is pulled out. If possible, the washing machine can also be tilted slightly. Water from the floor pan will drain.

Problem number 7: laundry is dirty after washing

There are many reasons why laundry remains dirty after washing.

Possible reasons:

1. The maximum capacity of the washing machine has been exceeded,

2. Too little or wrong detergent used,

3. Strong contamination of the drum, rubber, or detergent tray,

4. Too frequent use of short washing programs,

5. Wrong washing program.

It makes sense to clean the washing machine regularly, depending on the amount of laundry. This includes special detergents for washing machines. It is also necessary to regularly clean the detergent drawer and dry the washer thoroughly when not in use. Therefore, the door and the detergent drawer should be opened wide so that it dries inside.


The breakdown of the washing machine always occurs at the most inopportune moment. And if this happens, then little depends on you. The only thing you can do is conduct a visual inspection of the device. It is worth noting that the average life of most devices is five to ten years. However, especially expensive washing machines can work for up to 20 years without problems. But at some point, the device undergoes wear and tear and then you need to find out what the problem is and whether it is possible to repair the washing machine yourself.

Symptoms and possible causes of a faulty washing machine can be varied. Not always broken is a diagnosis. There are several reasons why SMA stopped working. In some cases, they are not fatal. The first thing you need to do is troubleshoot. A visual inspection will help identify those problems that lie on the surface.

Attention! Do not start repairing washing machines without a complete inspection of the device.

To find out what the problem with the washing machine is, first unplug the device from the power source. If necessary, disconnect from the water supply or simply turn off the water supply. What should be checked first? Check all hoses for leaks, just in case you often find puddles of water under the washer. Check the seal around the sunroof, damage to it can also cause leaks. The problem may be in the lint filter, if it is clogged, then water will flow through it.

The worst problems are when the drain pump is faulty, there is damage to the bearings or faulty electronics. In this case, you will have to disassemble the washer and look for sources of problems inside. But it is highly discouraged to do this without the appropriate skills and knowledge.

Warranty steps

Washing machine problems? If your equipment is still under warranty, but unexpectedly failed, then in no case try to fix it yourself or call the technician. You can get free service from an authorized service center under the terms of a valid warranty.

Find all the information on how to get help in solving washing machine problems on the official website of the manufacturer and contact the service department. Warranty repair is possible if you have not carried out any manipulations with the machine, have not untwisted it, and have not tried to fix the problem yourself.

Call the mechanic.

In some cases, it is impossible to repair a faulty washing machine on your own. Then you need a specialist. Turning to an experienced mechanic with the skills of repairing household appliances, you are guaranteed to receive high-quality help.

It should be noted that the cost of repair depends on several factors, including the complexity of the breakdown. Before the arrival of the technician, it is difficult to estimate the cost of repairs, only a thorough diagnosis will determine the source of the problem and the cost of maintenance.